Enlarge Image
|
4" Industrial, 48 inch Safety Strap with 2 D-rings
(Item no: IS-0148IN)
|
- The Industrial Safe-T-Strap™ is designed to fit up to 50mm diameter re-bar and are easily installed in shear walls or columns.
- Where shear walls or columns do not exist, Safe-T-Strap™ can be installed by inserting an 8 inch piece of rebar through the straps looped end, then inserting that end 4 inches into the poured concrete.
- When the fall hazard has been eliminated from the perimeter, i.e., the exterior wall has been erected, the Safe-T-Strap™ is removed by cutting it off at the base. Once Safe-T-Strap™ is installed, the forming of the floor continues and Safe-T-Strap™ is firmly anchored by pouring concrete over the protective sleeve.
- Once the fly forms or conventional forming is removed, Safe-T-Strap™ will be hanging from the corner of the sheer wall and the ceiling - six feet back from the perimeter.
- Horizontal lifelines or static lines may be attached to two opposite embedded Safe-T-Strap™s. Two workers may then attach their lifelines to the horizontal lifeline, providing maximum mobility and fall protection.
- Some jurisdictions may require an engineer to certify a static line is acceptable for various work practices.
|
|
